Post by S@HD Racing on Nov 18, 2020 15:02:34 GMT -7
** New For 2021**
Scout Class - Open to Scout Cars only: NO PRO RACERS
Car Body: (thewooden structure that holds the weight, axles and other add-ons)
Total Car Dimensions:
Wheel Base : Any as long as wheels do not exceed the 7″ total length requirement
Total Car Height : Not to exceed 3″ inches…
Total Car Length : Not to exceed 7″ inches…
Total Car Width : Not to exceed 2-3/4″ inches…
Total Car Weight : Not to exceed 143.0 grams or under on a 1/10th scale.
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Lubrication:
a. Graphite only
Axles:
a. Minimum diameter .084
b. Axles must have a nail head
Wheels:
BSA, Pinecar, Maximum Velocity, Awana
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. All markings must remain on the outside of the wheel
f. .360 Minimum Width of wheel, inner edge of tread to outer sidewall. (Inner hub does not count in width measurement)
g. No removing the letters or spokes or drilling additional holes on the outside of the wheel. Lettering does not need to be present on the inside of the wheel
h. Each wheel must be attached by an axle, no guide pins allowed.
i. Wheels may not be reversed, they must run in standard orientation.
j. Non-dominate/lifted wheel must meet wheel specifications.
k. All four wheels on car must be the same brand.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg
j. Propellants
Scout Class - Open to Scout Cars only: NO PRO RACERS
Car Body: (the
Total Car Dimensions:
Wheel Base : Any as long as wheels do not exceed the 7″ total length requirement
Total Car Height : Not to exceed 3″ inches…
Total Car Length : Not to exceed 7″ inches…
Total Car Width : Not to exceed 2-3/4″ inches…
Total Car Weight : Not to exceed 143.0 grams or under on a 1/10th scale.
4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle
Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Lubrication:
a. Graphite only
Axles:
a. Minimum diameter .084
b. Axles must have a nail head
Wheels:
BSA, Pinecar, Maximum Velocity, Awana
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. All markings must remain on the outside of the wheel
f. .360 Minimum Width of wheel, inner edge of tread to outer sidewall. (Inner hub does not count in width measurement)
g. No removing the letters or spokes or drilling additional holes on the outside of the wheel. Lettering does not need to be present on the inside of the wheel
h. Each wheel must be attached by an axle, no guide pins allowed.
i. Wheels may not be reversed, they must run in standard orientation.
j. Non-dominate/lifted wheel must meet wheel specifications.
k. All four wheels on car must be the same brand.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg
j. Propellants