Post by Admin on Dec 14, 2015 23:17:34 GMT -7
** Updates for 2022 **
Street Rod and Street Rod Bracket Racing
Street Rod Bracket Racing will be a full MOTM Class in 2022
Breakout time for entire Ice Series will be: 2.990
Breakout time for entire Fire Series will be: 3.040
Car Body / Dimensions
Wheel Base : You can not alter the wheel base with respect to the wheel openings of the car body
Height : Not to exceed 4″ inches…
Length : Limited to model length. No extension. Not to exceed 8.25 inches.
Width : Not to exceed 3.5″ inches
Weight : Not to exceed 170.0 grams on a 1/10th Digital scale
You can only use 1/25th or 1/24th scale model car body’s. From model kits. (AMT, Revell,etc.) Will be strictly enforced starting with the 2019 race season. If you have a question on whether the body is legal ask, do not assume. The allowed body’s are not to be longer than 8.25 inches. NO EXTENDERS only model body original length. Body’s are not to be altered in any way. NO SLOT CAR LEXAN BODIES!!!
Windshields, roofs, doors, fenders, grills, hoods, trunks and main body parts must be used (No chopping up, stretching, piecing together or hacking the body). No drilling out or cutting holes in the back of the car. Tail lights need to be attached.
NO OPEN WHEELED CARS
NO CONVERTIBLES
Cars must have windshields installed
NO GUIDE PINS/FINS!
Car must have at least 4 axles and wheels and only 3 wheels must touch.
The axles and wheels must be attached to the side of the car body / frame in the original wheel wells and/or fenders / no more than a 10 degree angle.
Car must be raced in a forward orientation.
Tape can be used only to hold the body to the chassis and cover the bottom but not to create aero advantages.
Center Rail Height : 1/4″ inch ( 7mm ) *
Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Axles
a. Minimum diameter .084
b. Axles must have a nail head
Wheels
BSA, Maximum Velocity, Awana, Pinecar
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. Lettering must remain on the inside and outside of the wheel.
e. Wheel covers may be used only if entire wheel is visible
f. 7.50mm Minimum Tread Width
g. Wheels must weigh at least 2 grams and a wheel can be removed after the race to be weighed to confirm weight. They cannot be intentionally taken under 2 grams and then brought back up to weight with foreign material.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg
Street Rod and Street Rod Bracket Racing
Street Rod Bracket Racing will be a full MOTM Class in 2022
Breakout time for entire Ice Series will be: 2.990
Breakout time for entire Fire Series will be: 3.040
Car Body / Dimensions
Wheel Base : You can not alter the wheel base with respect to the wheel openings of the car body
Height : Not to exceed 4″ inches…
Length : Limited to model length. No extension. Not to exceed 8.25 inches.
Width : Not to exceed 3.5″ inches
Weight : Not to exceed 170.0 grams on a 1/10th Digital scale
You can only use 1/25th or 1/24th scale model car body’s. From model kits. (AMT, Revell,etc.) Will be strictly enforced starting with the 2019 race season. If you have a question on whether the body is legal ask, do not assume. The allowed body’s are not to be longer than 8.25 inches. NO EXTENDERS only model body original length. Body’s are not to be altered in any way. NO SLOT CAR LEXAN BODIES!!!
Windshields, roofs, doors, fenders, grills, hoods, trunks and main body parts must be used (No chopping up, stretching, piecing together or hacking the body). No drilling out or cutting holes in the back of the car. Tail lights need to be attached.
NO OPEN WHEELED CARS
NO CONVERTIBLES
Cars must have windshields installed
NO GUIDE PINS/FINS!
Car must have at least 4 axles and wheels and only 3 wheels must touch.
The axles and wheels must be attached to the side of the car body / frame in the original wheel wells and/or fenders / no more than a 10 degree angle.
Car must be raced in a forward orientation.
Tape can be used only to hold the body to the chassis and cover the bottom but not to create aero advantages.
Center Rail Height : 1/4″ inch ( 7mm ) *
Center Rail Width : 1 5/8″ inches (4.2 cm) *
* Wheels must clear the outside to outside center rail width measurement
Axles
a. Minimum diameter .084
b. Axles must have a nail head
Wheels
BSA, Maximum Velocity, Awana, Pinecar
a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. No Angling, Reshaping, Canting, Round Crowning, Tapering, H-ing, V-ing, Dishing, the outside of the wheels and/or tread surface
d. Lettering must remain on the inside and outside of the wheel.
e. Wheel covers may be used only if entire wheel is visible
f. 7.50mm Minimum Tread Width
g. Wheels must weigh at least 2 grams and a wheel can be removed after the race to be weighed to confirm weight. They cannot be intentionally taken under 2 grams and then brought back up to weight with foreign material.
The following Modifications are not allowed
a. Starting or finish line devices
b. Electronic or lighting devices
c. Glass or extremely fragile parts
d. Paint that is wet, smudges or extremely sticky
e. Bearings and/or Bushings
f. Sharp objects, sandpaper or abrasives on the bottom of car (We do not want any damage to the rubber stopping pads)
g. Axles and/or wheels attached to any device that mechanically or alters rotation and spin
h. Any part of the car to go beyond the starting peg